Which makes a better Go Kart Body?
Plastic or Fiberglass?
The answer... M and M Performance
M & M Performance Bodywork is made from the finest virgin ABS plastic available. Unlike other plastic
bodies, there's no regrind used here. Our bodies come right out of the mold
with a high gloss finish. Scratches don't show because the color goes all
the way through and ABS plastic is easy to repair compared to fiberglass.
Most scratches and cracks can be repaired quickly with inexpensive ABS plastic
cement and a heat gun.
Regrind comes from the excess material that is removed from a product after it has
been molded. This material is then "reground" and melted
again to make another product. This process allows for impurities
to get into the plastic that dull its finish and reheating causes
the plastic to become brittle. It's a little cheaper but definitely
not something that you want on your kart!
M & M Performance
Bodywork feature a 2 piece lower edge construction. Other bodies
are formed by stretching the material to it's thinnest point at the
very front edge of the nose. M & M forms a floor pan first, molding
in several indentations that strengthen the nose for side impact.
Then the top piece is formed and sonic welded to the floor pan at
the bumper area. This gives you double the material thickness, right
where you need it most, instead of half.
Fiberglass is strong, but it's
heavy. To make it light, you have to make it thin. Used plastic and
thin fiberglass all ad up to one thing - busted up bodies, or worse
yet, unfinished races. You've got to finish all the laps if you want
to win and that is what M & M Performance Bodywork is made to do.
< Obviously not an M & M Body!
Our Promise to you
Simply put, M & M Performance
Bodywork is the highest quality kart bodies available today.
Still not convinced? We back our claim with a 100% satisfaction
guarantee against defects in materials and workmanship.
If you feel certain that your M & M Performance Bodywork is defective, please call us for warranty details.
M & M Performance, LLC.
*Racing is a dangerous sport where close racing and speed can produce catastrophic results. The driver assumes all responsibility for personal injury or damage to his/her equipment while participating in these events. We warranty and replace bodywork that fails due to defects in materials and/or workmanship only. This does not apply to failure due to normal wear and tear including damage incurred during severe racing incidents or other conditions beyond our control.
Copyright © 2011 M & M Performance, LLC - All Rights Reserved